LCD splicing screen Huaping encountered how to do?
LCD splicing has excellent performance and reasonable prices in the domestic market has been widely welcomed. Which has up to 5 to 80,000 hours of life, stable system, low maintenance costs, is the most cost-effective large-screen display system. LCD screen splicing system in the market continues to heat up, by many users of the recognition and affirmation, application sales amazing. So LCD splicing screen Huaping encountered in the course of how to do?
1. Check the LCD screen and card splicing connection is loose. Poor contact will result in a "clutter", the video "noise" is the most common form of the phenomenon.
2, check whether the card is excessive overclocking. If excessive overclocking graphics cards, usually irregular, intermittent stripes. At this point, it should be appropriate to reduce the overclock. Note, first of all to reduce the memory frequency.
3, check the quality of graphics. If Huaping problems after replace the video card, and after using the first and second trick did not work, you should check the anti-electromagnetic interference and electromagnetic shielding quality graphics whether clearance. The specific measures are: some parts may produce electromagnetic interference as far away from the graphics card installed (such as a hard disk), look at the video disappears. If the card is determined electromagnetic shielding function, but off, replace the video card, or home-made shield.
4. Check the LCD splicing screen resolution or refresh rate is set too high. LCD splicing screen resolution is generally lower than the crt monitor, if more than the manufacturer's recommended best resolution, there may Huaping phenomenon.
5, check that you have an incompatible graphics card driver. This is usually easily overlooked, because the graphics driver update speed faster (especially nvidia graphics card), some users are always eager to install the latest version of the driver. In fact, some of the latest test version of either driver, or is optimized for a specialized version of the card game or the use of such drives can sometimes lead to the appearance of the video. Therefore, we recommend to make use of Microsoft-certified drivers, graphics card manufacturers to provide the best use of the drive.
If you use more than five strokes after, still can not solve the problem, there may be LCD splicing screen quality problems. In this case, replace the other monitors tested.
1. Check the LCD screen and card splicing connection is loose. Poor contact will result in a "clutter", the video "noise" is the most common form of the phenomenon.
2, check whether the card is excessive overclocking. If excessive overclocking graphics cards, usually irregular, intermittent stripes. At this point, it should be appropriate to reduce the overclock. Note, first of all to reduce the memory frequency.
3, check the quality of graphics. If Huaping problems after replace the video card, and after using the first and second trick did not work, you should check the anti-electromagnetic interference and electromagnetic shielding quality graphics whether clearance. The specific measures are: some parts may produce electromagnetic interference as far away from the graphics card installed (such as a hard disk), look at the video disappears. If the card is determined electromagnetic shielding function, but off, replace the video card, or home-made shield.
4. Check the LCD splicing screen resolution or refresh rate is set too high. LCD splicing screen resolution is generally lower than the crt monitor, if more than the manufacturer's recommended best resolution, there may Huaping phenomenon.
5, check that you have an incompatible graphics card driver. This is usually easily overlooked, because the graphics driver update speed faster (especially nvidia graphics card), some users are always eager to install the latest version of the driver. In fact, some of the latest test version of either driver, or is optimized for a specialized version of the card game or the use of such drives can sometimes lead to the appearance of the video. Therefore, we recommend to make use of Microsoft-certified drivers, graphics card manufacturers to provide the best use of the drive.
If you use more than five strokes after, still can not solve the problem, there may be LCD splicing screen quality problems. In this case, replace the other monitors tested.